How to Reset the Tyre Pressure on a Hyundai i20?

Maintenance and Repairs
1

If you’re wondering how to reset the tyre pressure monitoring system (TPMS) on your Hyundai i20, you’re in the right place! Follow these simple steps to ensure your tyre pressure light turns off and you’re back on the road with peace of mind.

Step-by-Step Guide to Reset TPMS:

  1. Check Tyre Pressure: Before resetting, make sure all tyres (including the spare) are inflated to the recommended pressure. You can find this information on the driver’s side door jamb.
  2. Turn On the Ignition: Insert the key into the ignition and turn it to the ‘on’ position (without starting the engine).
  3. Locate the TPMS Reset Button: Find the TPMS reset button under the steering wheel or in the glove compartment. Refer to your vehicle’s manual if you have trouble locating it.
  4. Press and Hold the Reset Button: Hold the reset button until the tyre pressure light blinks three times, then release it.
  5. Start the Engine: Turn the ignition off and then back on again.
  6. Take a Test Drive: Drive for about 10 minutes above 25 mph and check if the light goes off.

Common Issues:

  • If the light doesn’t turn off, double-check your tyre pressures.
  • In some cases, the TPMS may need re-calibrating after tyre rotation or replacement.
  • Persistent issues may require a visit to a Hyundai dealer for diagnostic.

Keeping your tyres at the correct pressure not only improves safety but also enhances fuel efficiency. If you have further questions or tips, feel free to share!

2

To reset the tire pressure on the Hyundai i20, you first need to ensure the tires are inflated to the recommended pressure. The TPMS (Tire Pressure Monitoring System) alerts you when tire pressure drops below this level and has components like pressure sensors and a warning light on your dashboard.

3

That’s really helpful! I didn’t know the TPMS used sensors to monitor pressure. How often should I check the tire pressure to maintain optimal safety?

4

You should check your tire pressure at least once a month and before any long trips. Keeping the correct pressure helps with fuel efficiency and tire longevity—plus, it’s safer overall!

5

Absolutely! I think it’s easy to forget, but regular checks can prevent blowouts and improve your driving experience.

6

Also, if the tire pressure warning light stays on after adjusting the pressure, you might need to reset the system. In the i20, you usually can do this through the settings in the dashboard menu.

7 Likes
7

Thanks for the tip! Why does the system sometimes need a reset even after fixing the tire pressure? Does it lose calibration?

8

Great question! The TPMS can become uncalibrated due to changes in temperature or if a tire was replaced. That’s why it’s important to reset it after making adjustments.

3 Likes
9

Even a slight under-inflation can impact your handling and fuel consumption. So, always make it a habit to check! It’s just like that saying: ‘Better safe than sorry.’

10

Exactly! I always say the same while driving—better consider good pressure management a part of your driving routine.

11

Did you know that under-inflated tires can decrease fuel efficiency by up to 3%? That’s a lot of wasted gas! Just think of all the coffee you could buy with that money!

5 Likes
12

Haha, that’s true! Investing a moment in tire maintenance can really pay off in the end—who doesn’t love more coffee money?

13

It’s definitely essential to remember that a well-maintained TPMS not only prolongs the life of your tires but also enhances your overall driving safety. A bit of knowledge goes a long way!

14

To reset the tyre pressure on a Hyundai i20, start by ensuring all tires are properly inflated to the manufacturer’s specifications. Then, turn on the ignition without starting the engine. Press and hold the tyre pressure reset button until the indicator light blinks three times. It’s usually located on the dashboard near the steering wheel.

15

Great tips! I’d add that it’s a good idea to check your tire pressure regularly to avoid issues down the road. Also, knowing where the reset button is can save a lot of hassle later.

1 Like
16

I always found resetting the tyre pressure a bit confusing. Can anyone clarify if you need to drive for a bit after resetting it for the changes to take effect?

3 Likes
17

Good question! After resetting, the system typically recalibrates while driving, but you should check the indicator light to ensure it has reset properly.

18

Don’t forget to have a reliable tire gauge handy when you check pressures at home! It really helps to ensure everything is spot on before you reset the system.

19

I recently reset the tire pressure on my i20, and I used a simple tire gauge tool. Once I got all tires to the correct PSI, the reset was a breeze. It’s so satisfying to see that light go off!

20

Absolutely! It feels like a mini victory. By the way, does anyone else feel like tyre pressure light is like a nagging parent? Always reminding you about something you just did!

2 Likes